Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Highly Reproducible Flexible Ion-selective Electrodes for the Detection of Sodium and Potassium in Artificial Sweat

It is well known that potentiometric sensors provide a versatile, cost-effective, and efficient platform for wearable applications. Unfortunately, mass production and commercialization of such devices is often constrained by the requirement of a calibration step, which is due to the poor sensor-to-sensor reproducibility and the need of conditioning the electrodes in the analyte before use. Herein, we fabricated calibration-free flexible sensors including ion-selective electrode and reference electrode by integrating single-walled carbon nanotubes (SWCNTs) with poly(3-octylthiophene) (POT) and applying on polyethylene terephthalate (PET) substrate. The developed sodium and potassium ion-selective electrodes (ISEs) display excellent repeatability, selectivity, stability as well as high sensor-to-sensor reproducibility, with a standard deviation of as low as 1.0 mV in artificial sweat microliter samples volume.     

Fabrication of poly(ϵ-caprolactone)/paclitaxel (core)/chitosan/zein/multi-walled carbon nanotubes/doxorubicin (shell) nanofibers against MCF-7 breast cancer

In the present study, paclitaxel (PTX), multi-walled carbon nanotubes (MWCNTs), and doxorubicin (DOX) have been simultaneously doped into the poly(ϵ-caprolactone) (PCL)/chitosan/zein core-shell nanofibers to increase its cytotoxicity for MCF-7 breast cancers killing. The physico-chemical properties of synthesized nanofibers were determined by scanning electron microscope, Fourier-transform infrared spectroscopy, tensile strength, and degradation rate determinations. The in vitro release studies demonstrated the sustained release of drugs from core-shell nanofibrous scaffold. The cytotoxicity and compatibility of core-shell nanofibers were investigated by their treating with MCF-7 breast cancer cells and L929 normal cells, respectively. PCL/PTX/chitosan/zein/MWCNTs/DOX core-shell nanofibers containing 1 wt% MWCNTs, 100 μg ml⁻¹ DOX and 100 μg ml⁻¹ PTX had a high biocompatibility with a 84% MCF-7 cancer cells killing. The in vivo studies revealed the synergic effects of MWCNTs and anticancer drugs on the tumor inhibition. This method could be considered as a new way for developing of MWCNTs loaded-nanofibers for cancer treatment in future.     

Sterically-Hindered Molecular p-Dopants Promote Integer Charge Transfer in Organic Semiconductors

Molecular p-dopants designed to undergo electron transfer with organic semiconductors are typically planar molecules with high electron affinity. However, their planarity can promote the formation of ground-state charge transfer complexes with the semiconductor host and results in fractional instead of integer charge transfer, which is highly detrimental to doping efficiency. Here, we show this process can be readily overcome by targeted dopant design exploiting steric hindrance. To this end, we synthesize and characterize the remarkably stable p-dopant 2,2′,2′′-(cyclopropane-1,2,3-triylidene)tris(2-(perfluorophenyl)acetonitrile) comprising pendant functional groups that sterically shield its central core while retaining high electron affinity. Finally, we demonstrate it outperforms a planar dopant of identical electron affinity and increases the thin film conductivity by up to an order of magnitude. We believe exploiting steric hindrance represents a promising design strategy towards molecular dopants of enhanced doping efficiency.     

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.     

Targeted Delivery of Anticancer Drug Loaded Charged PLGA Polymeric Nanoparticles Using Electrostatic Field

Pure positive electrostatic charges (PPECs) show suppressive effect on the proliferation and metabolism of invasive cancer cells without affecting normal tissues. PPECs are used for the delivery of drug-loaded polymeric nanoparticles (DLNs) capped with negatively charged poly(lactide-co-glycolide) (PLGA) and Poly(vinyl-alcohol) PVA into the tumor site of mouse models. The charged patch is installed on top of the skin in the mouse models' tumor region, and the controlled selective release of the drug is assayed by biochemical, radiological, and histological experiments on both tumorized models and normal rats' livers. It is found that DLNs synthesized by PLGA show great attraction to PPECs due to their stable negative charges, which would not degrade immediately in blood. The burst and drug release after less than 48h of this synthesized DLNs are 10% and 50%, respectively. These compounds can deliver the loaded-drug into the tumor site with the assistance of PPECs, and the targeted-retarded release will take place. Hence, local therapy can be achieved with much lower drug concentration (conventional chemotherapy [2 mg kg⁻¹] versus DLNs-based chemotherapy [0.75 mg kg⁻¹]) with negligible side effects in non-targeted organs. PPECs have many potential clinical applications for advanced-targeted chemotherapy with the lowest discernible side effects.     

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02–200 ng mL⁻¹), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL⁻¹) and limit of quantification (1.02 ng mL⁻¹), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.     

Deep eutectic solvent-based modified quick,easy, cheap,effective, rugged,and safe extraction combined with solidification of floating organic droplet-dispersive liquid–liquid microextraction of some pesticides from canola oil followed by gas chromatography analysis

Herein, a modified quick, easy, cheap, effective, rugged, and safe extraction was developed based on deep eutectic solvent for the extraction of several pesticides from canola oil samples. In this work, first, different sorbents were selected to remove the sample interferences, and the composition of the sorbents was optimized by simplex centroid design. The extracted analytes were more concentrated by solidification of floating deep eutectic solvent droplet-dispersive liquid–liquid microextraction. Low limits of detection (0.15–0.23 ng/g) and quantification (0.49–0.76 ng/g), high extraction recoveries (74–87%) and enrichment factors (224–263), and good repeatability (relative standard deviation equal to or less than 5.1 and 4.7% for intra- and interday precisions, respectively) were achieved using the proposed method. The suggested approach was used for the quantification of the analytes in different canola oil samples. Additionally, the effects of microwave irradiations exposure and sonication in decontamination of the samples were evaluated. In this method, there was no need for centrifugation and toxic solvents. Also, effective extraction of the analytes and minimizing interferences were achieved through the use of various sorbents.     

Thermal and pH Dual Responsive Copolymer and Silver Nanoparticle Composite for Catalytic Application

N‐Isopropylacrylamide and vinyl imidazole copolymer, P(NIPAM‐co‐VI), was synthesized by free radical emulsion polymerization. Then, the copolymer and silver nanoparticle composite, P(NIPAM‐co‐VI)‐Ag, was prepared by in situ reduction of AgNO₃ with NaBH₄. Due to the coexistence of thermal‐responsive PNIPAM and pH‐responsive PVI, P(NIPAM‐co‐VI) and P(NIPAM‐co‐VI)‐Ag exhibited both thermal and pH responsibility, their size would change while altering the temperature or pH of the circumvent. Their thermal and pH dual responsive properties were studied by dynamic light scattering (DLS). P(NIPAM‐co‐VI)‐Ag could be stably dispersed in water at a pH range from 3.0 to 9.3, which is favorable to use P(NIPAM‐co‐VI)‐Ag as a catalyst in the reduction reaction of p‐nitrophenol. The reaction rate constant (k_app) increased with the decrease of pH or the increase of VI content in the copolymer.